Stringing the Crossbow Without the Stringer:

Now you can safely remove the stringer from the crossbow.

After you have done this, the crossbow is successfully strung or re-strung as all the tension is on the bow.

Un-cock the crossbow by either shooting either on the ground with an arrow or on a safe target, or pulling on the stringer and letting it down slowly with your foot still in the stirrup.

Once you have set both ends in the grooves, you have a new string in place. After successfully doing the first end, move to the other end, and repeat the step.

Now, take your new string and place its one end on the groove.

When restringing the crossbow, detach the loops of the current string carefully from the grooves before proceeding to the next stage.

Don’t forget to put the trigger safety on the safe side while cocking.

Now, by putting your foot in the stirrup and pulling each side of the stringer to the trigger box, pull the stringer back and cock the crossbow.

Take the crossbow stringer out and put its loops at the tip of each limb on the secondary shelf and make sure that the stringer’s loops are in there firmly as you will use the stringer to cock the bow.Also, the surface should be wide enough to cock the crossbow safely.

Neatly layout your crossbow, stringer, and new string on a clean flat surface.This is not as durable as a real crossbow string, so if it shows damage you may need to replace it. There are two ways to string and restring your crossbow: String the Crossbow With a Stringer:Ī stringer is a cord little longer than the string of the crossbow, with a loop on both of its sides. Stringing a crossbow can be both challenging and dangerous if you don’t know what you’re doing, so in this comprehensive guide, we will discuss all the steps required to string a crossbow.įollowing the steps and recommendations provided in this article will ensure the longevity of your crossbow’s functionality and prevent the user from experiencing haphazard accidents caused by a damaged string. Removing the string after the hunting season is over and restringing it for the next season also helps preserve your crossbow for a longtime. However, the average lifespan of a crossbow string is between 200-600 fires on average.Īlthough wear and tear are common, lubricating the rail and waxing the string can protect it for a while, string eventually begins to break down and for optimum performance, you need to restring the crossbow. Most of the modern-day crossbows come with the prod already strung, and hunters can start shooting right away. Retain its proper specification for performance and safety.The modern crossbow is a high-tech weapon that uses innovative design and the latest technology in construction and sighting. Keep your crossbow in proper working order for maximum performance and safe operation. Replace a worn out crossbow string with this performance string.

Even under proper use, your crossbow string will eventually need replacing. If string becomes frayed, immediately replace with a new string. Damage to the crossbow and/or injury to the user could occur. Never use a frayed string as it may break when you are cocking your bow. As you work the wax in, you'll notice it getting softer as the heat from your hand causes it to melt. For the proper maintenance of your crossbow, just apply some bow string wax to the exposed string, not to the serving, on the crossbow and take your thumb and index finger and work the wax into string. Repeated dry firing will quickly wear out your crossbow string. Always have an arrow loaded when you shoot. To extend the life of your string, first, never 'dry fire' your crossbow, and second, please wax the string regularly. Original Replacement String for SAS Wrath Pistol Crossbow The crossbow string is made of polyester and also comes with 2 end caps (tips) for the bow.

Crossbow pistol string